Here you can learn how to integrate the reev software into a GEWISS charging station.

The integration can be done independently in a few simple steps.

Compatible models: I-CON, I-ON

TABLE OF CONTENTS

• What is necessary in advance so that the integration can take place
  • Choose your GEWISS product
  • Connect the charging station
  • OCPP & Connectivity
  • OCPP parameters

What is necessary in advance so that the integration can take place

• reev operator set
  The operator / CPO (CPO = Charge Point Operator) or contracted service provider must have received the operator set. Here, you will find the necessary onboarding materials, such as QR code sticker, SIM card and activation code
• Laptop (Windows operating system) with GEWISS application installed for configuration. If you do not have this, please contact GEWISS Support
• An active internet connection via Ethernet or WiFi to connect to the reev backend.

Step-by-step Integration

In the following chapters, the integration process is demonstrated step-by-step. If you have all the necessary utensils from the previous chapter at hand, you can carry out the integration in parallel.

Choose your GEWISS product

Connect the charging station

• Click on "Connect". After the charging station has been successfully connected to the laptop, the "Disconnect" field is displayed.

• To apply the settings of the charging station, click "Read All"
• Then click "Sync Time" to adjust the system time.

OCPP & Connectivity

Insert the following settings:

• Central System: wss://ocpp.reev.com/api/ocpp/web-socket
• HostName: ocpp.reev.com

OCPP parameters

As a rule, the OCPP parameters should not be changed!
Check whether the connection timeout has been set to the value 600.

Save Settings

• Click "Write All" to apply the settings you have made. The charging station is then connected to the reev backend and can be put into operation.

Further steps

• In order to be able to fully use your charging infrastructure, we ask you to open the following links for onboarding:
  
• https://install.reev.com/cpo-onboarding -> For the electrician to obtain and create all necessary data of the charging infrastructure.
  
• https://reev.com/reev-connect-setup/ -> For the operator of the charging infrastructure to obtain and create all necessary operator data.

Support

Do you have further questions or other concerns? Contact us using the button below. If this article does not answer all your questions or you have suggestions for improvement, we look forward to your feedback.

Your reev team