Through your reev Dashboard, you can easily add or remove charging cards at any time. This article shows you how.

You can add charging cards to your reev Dashboard via the Users menu, under the Charging Cards submenu.

To do this, click on Add New Charging Card at the top.

• If you want to add a reev charging card or keyfob, please enter the five-digit code displayed on the card or keyfob. You can then assign a name to it. 
• To register your own RFID cards, click on Other RFID card. Next, you need to enter the UID (serial number) of the charging card. Information on which RFID cards can be registered with ABL charging stations can be found here. Instructions on how to add your own RFID cards to the dashboard and read their UID are available here.
  
  
• 

Note: Active charging cards authorize users to charge across your entire infrastructure.

Note 2: Instructions on how to assign charging cards to specific users can be found here.

Support

Do you have additional questions or other concerns? Contact us via the button below. If this article does not answer all of your questions or if you have suggestions for improvement, we appreciate your feedback.

Your reev Team